Universal Adhesive Hydrofoil Mount - Standard
The FoilMount is a universal hydrofoil mounting system, this
means that you can put a hydrofoil track on just about any board you already
have.
The FoilMount uses a specially designed 3M adhesive tape to
stick to the bottom of your board. It
will accommodate any foil that uses the 90mm track system (this is industry
standard). It is a easy way to fix a
broken track system. It is also great
for retrofitting boards with through bolt holes to give them the adjust-ability
of a sliding track system. The FoilMount
can be removed but cannot be reused. It
is very easy to install, just prep the surface with alcohol, peel the tape
backing, and stick!
Standard FoilMount: The standard mount is a flat plate that
can be installed on any flat board surface.
It is suitable for most SUP boards, hydrofoil boards, Skim boards,
Surfboards. If you surface has some
curve to it try the Ridge Mount system.
If you're trying to outfit a board with a tuttle box system or a
windsurfing rig try the Hole Mount system.
If you have mounting questions you can reach us by using our contact
form.
The 2.0 Standard now includes:
- Upgraded FoilMount plate with one piece adhesive backing
- 4 high strength brass slider nuts
- 1 set of 4 flat head M8x16mm bolts for Slingshot and most
other foils
- 1 set of 4 flat head M6x12mm bolts for Takuma Surf
hydrofoils
- 1 set of 4 pan head M8x20mm bolts for Moses and older Liquid
Force foils
- (instructions,
alcohol pads, scotch-brite pad, FoilMount box)